Site map    Tel:+86-21-37709251    Contact Us Chinese
Optical STM-1 to Electrical STM-1 converter
STM-1 photoelectric converter provides coverting between electrical interface and optical interface for STM-1 service based on SDH technology. All the interface daughter boards support hot swap

  Request price     Contact us

INFORMATION

Overview:
STM-1 photoelectric converter provides coverting function between electrical interface and optical interface for STM-1 service based on SDH technology.
STM-1 photoelectric converter is an interface conversion equipment supplied with one STM-1 electrical interface and one STM-1 optical interface. All the interface daughter boards support hot swap.
It carries the data services via the container in SDH.
STM-1 photoelectric converter applies 19" rack of 1U high, which can be placed on the desktop or installed in a cabinet of 2.2m or 2.6m high, and can directly drive the top-mounted aural-visual alarm unit.
There are three options for the power supply to the equipment: AC ~220V, DC -48V, and AC ~220V with DC-48V backup. The choise is to be made by the user according to the actual situation.
 
Features:
◆ Providing a standard STM-1 electrical interface complying with G.664;
◆  Providing a standard STM-1 optical interface complying with G.664;
◆ Providing two top-mounted alarm output interfaces in the programmable relay mode, and two switch input interfaces;
◆ With excellent synchronization characteristics;
◆ Optional power supply, DC-48V or AC220V.

Specifications
         Capacity

        One STM-1 O/E converter.

STM-1 Optical interface

ITU-T G.957 STM-1.

Line rate:          155520 kbps

         Line code:           Scrambled NRZ

         Wavelength: 1.31μm(typical)

                            1.55μm(optional)

          Connector:           SC or FC

          Optical:                S1.1 (typical), L1.1(optional)

 STM-1 electrical interface

ITU-T G.703

Bit rate:             155520 kbps±20ppm

          Line code:           CMI

          Impedance:         75W (unbalanced)


Application:
electrical to optical STM-1 converter







FAQ

Question: Can the stm-1 converter(electrical/optical)  matched with brands of Fiberhome,zte,huawei or raisecom?
Answer: Yes,the STM-1 converter can be compatible with other brands SDH device.



Ordering information


Related Products

DS3/E3 to Ethernet converter

4*10/100M ethernet over E3/DS3 conversion

Ethernet over SDH STM-1 converter

2*10/100M ethernet over optical STM-1 transmission