Site map    Tel:+86-21-37709251    Contact Us Chinese
2 Ethernet over 2E1 Convergency converter
BD-2E1-2ETH-CON is multiservice node ring network system equipment is the highly integrated access devices with the bandwidth share function. The 2E1 device can realize two RS-232/485 and 2 Ethernet over 2 channel E1 aggregation transmission.

  Request price     Contact us

INFORMATION

Overview

BD-2E1-2ETH-CON is multiservice node ring network system equipment is the highly integrated access devices with the bandwidth share function. The 2E1 device can realize two RS-232/485 and 2 Ethernet over 2 channel E1 aggregation transmission. The Ethernet interfaces in different nodes can consist a shared Ethernet switch.

The device can be used as Point to point application or used with central multi-service device as chain network or ring network. The 2E1 convergency device can meet customers’ kinds application by flexible, economical, maintenance application.It can be widely used in a variety of environments capture the telecommunications, electricity, water, finance, transportation, mining, public security and other data transmission services.


PRODUCT CHARACTERISTIC

   ●   Based on self-copyright IC.

   ●   The device provide two channel E1 interface, two Ethernet and two RS232/485.

   ●   Ethernet port 10/100M half/full duplex auto-negociation.

   ●   RJ45 interface supports AUTO-MDIX.

   ●   The device can be used as point to point or ring network or chain network. 

   ●   BNC 75-ohm dual coax and RJ45 120-ohm twisted-pair G.703 connections provided, and support 75ohm/120ohm adapt ;

   ●   Support Web management.

   ●   Power can support AC or DC or double power.

E1 Interface

         Line Rate: 2.048Mbps±50ppm

         Line Code : HDB3

         Interface Standard: ITU-T G.703

         E1 Impedance: 75Ω(unbalance) and 120Ω(balance)

         Connections : dual coax BNC and 120-ohm twisted-pair (RJ45)

        Jitter tolerance : finer than G.742 and G.823

 

 Ethernet 10/100Base-T Interface

 Rate: 10/100M, full/duplex auto-negotiationrear picture

 Protocol: Support IEEE 802.3

 MAC Address Entiries: 4096 Entiries

 Total Memory Sizes: 64MBits SDRAM

 Physical interface: RJ45, support AUTO-MDIX

Power supply                        

working voltage range wide, good        

anti-disturb and Isolation, work stable     

option I – DC-48V,range DC-36V~DC-72C   

option II – AC220V,range AC165V~AC240V

Power Consumption:    <=3 Watts

Environment condition                  

Operating temperature:  0C~+50 C        

Storage temperature:   -20 C~+70 C

Relative temperature:95% (uncondensed)

Dimension                  

       210mm(L)

       140mm(W)

        30mm(H)

 

Application1:

2 ethernet over 2E1 point to point application

 

Application 2,point to multi-point application

                        LAN1 LAN2 LAN3 can communicate each other.

e1 to ethernet point to multipoint application

Application3: Ring network application

2e1 to 2ethernet ring application



Ordering information


Related Products

16E1 to 4Ethernet Convergence Protocol Converter

4ethernet over 16E1 convergency converter

4E1 over Ethernet Multiplexer

4E1 TDM over IP,two uplink ethernet with two downlink data