INFORMATION
OVERVIEW
The BD-S35048PFM is a
full gigabit managed PoE switch. It has 48*10/100/1000Base-T RJ45 ports and 4*100/1000Base-X
SFP fiber slot ports. Port 1-48 can support IEEE802.3af/at standard PoE power
supply. single port PoE power reaches 30W. As a PoE power supply device, it can automatically detect
and recognize the power receiving equipment that meets the standard and supply
power through the network cable. It can supply power to POE terminal equipment
such as wireless AP, webcam, VoIP phone, building visual access control
intercom, etc. through network cable, to meet the network environment that needs
high-density PoE power supply.It is suitable for hotels, campuses, parks, shopping malls, scenic spots,
hospitals, factory dormitory and small and medium-sized enterprise.
The BD-S35048PFM has L2+full
Web management function, supports IPV4 management, static route full line rate
forwarding, complete security protection mechanism, complete ACL/QoS policy and
rich VLAN functions, and is easy to manage and maintain. Supports multiple
network redundancy protocols STP/RSTP/MSTP (<50ms) to improve link backup
and network reliability. When one-way network fails, communication can be
quickly restored to ensure important Uninterrupted communication for
applications. According to the actual application requirements, you can
configure multiple application services such as PoE power management, port
traffic control, VLAN division, and SNMP through the Web management mode.
FEATURE
n Gigabit
wire speed access, SFP port uplink
◇ Supports Gigabit Ethernet
port and gigabit SFP uplink port combination, which enables users to flexibly
build networking to meet the needs of various scenarios.
◇ Support non-blocking
wire-speed forwarding.
◇ Support full-duplex based
on IEEE802.3x and half-duplex based on backpressure.
n Intelligent
PoE power supply
◇ 48*10/100/1000Base-T RJ45
ports, meeting the needs of security monitoring, teleconferencing system,
wireless coverage, and other scenarios.
◇ IEEE802.3af/at PoE
standard, without damaging non-PoE devices.
◇ Priority system for PoE
port, it will supply power to the high priority level port first when the power
budget is insufficient and avoid overwork of the device.
◇ PoE network management,
realize PoE port power allocation, priority setting, port power status viewing,
time scheduling, etc.
n Strong business processing capability
◇ IEEE802.1Q VLAN, flexible
VLAN division, and QinQ configuration.
◇ QoS, Priority mode based
on 802.1P, Port & DSCP, queue scheduling algorithm including Equ, SP, WRR
& SP+WRR.
◇ ALC, filter data packet
through configuring matching rules, processing operation & time permission,
and provide flexible and safe access control.
◇ IGMP V1/V2 and IGMP
Snooping.
◇ STP/RSTP/MSTP.
◇ Static and dynamic
aggregation.
n Security
◇ 802.1X authentication.
◇ Port isolation,Storm
control.
◇ IP-MAC-VLAN-Port binding.
n Stable and
reliable
◇ Low power consumption, galvanized
steel casing, The Fan active cooling.
◇ Self-developed power
supply, high redundancy design, providing a long term and stable PoE power
output.
◇ CCC,CE, FCC, RoHS.
◇ The user-friendly pane
can show the device status through the LED indicator of PWR, Link ,PoE.
n Easy
operation and maintenance management
◇ Web management, CLI
command line (Console, Telnet), SNMP (V1/V2/V3).
◇ HTTPS, SSLV3, and
SSHV1/V2.
◇ RMON, system log, LLDP,
and port traffic statistics.
◇ CPU monitoring, memory
monitoring, Ping test, and cable diagnose.
TECHNICAL SPECIFICATION
|
Model
|
BD-S36048PFM
|
|
|
Interface
Characteristics
|
|
|
Fixed Port
|
48*10/100/1000Base-T PoE ports
(Data/Power)
4*100/1000Base-X uplink SFP slot
ports(Data)
1*RS232 console port(115200,N,8,1)
|
|
|
Ethernet Port
|
Port 1-48 can support
10/100/1000BaseT(X) auto detect, full/half duplex MDI/MDI-X adaptive
|
|
|
Twisted Pair Transmission
|
10BASE-T: Cat3,4,5 UTP(≤100 meter)
100BASE-TX: Cat5 or later UTP(≤100
meter)
1000BASE-T: Cat5e or later UTP(≤100
meter)
|
|
|
SFP Slot Port
|
Gigabit SFP optical fiber interface,
default matching optical modules (optional order single-mode / multi-mode,
single fiber / dual fiber optical module. LC)
|
|
|
Optical Cable/ Distance
|
Multi-mode:850nm / 0~500M (1.25G), Single-mode:1310nm
/ 0~40KM, 1550nm / 0~120KM.
|
|
|
Chip Parameter
|
|
|
Network Management Type
|
L2+
|
|
|
Network Protocol
|
IEEE802.3 10BASE-T, IEEE802.3i
10Base-T,IEEE802.3u 100Base-TX
IEEE802.3ab 1000Base-T, IEEE802.3z
1000Base-X, IEEE802.3x
|
|
|
Forwarding Mode
|
Store and Forward(Full Wire Speed)
|
|
|
Switching Capacity
|
368Gbps (Non-blocking)
|
|
|
Forwarding
Rate@64byte
|
77.38Mpps
|
|
|
CPU
|
750MHz
|
|
|
DRAM
|
1G
|
|
|
FLASH
|
256M
|
|
|
MAC
|
16K
|
|
|
Buffer Memory
|
12M
|
|
|
Jumbo Frame
|
10K
|
|
|
LED Indicator
|
Power: PWR (Yellow), System: SYS (Yellow), Network: Link/Act
(Yellow), PoE: PoE (Green), Fiber port: L/A(Green)
|
|
|
Reset Switch
|
Yes, One-button factory reset
|
|
|
PoE & Power Supply
|
|
|
PoE Port
|
Port 1 to 48
|
|
|
PoE Management
|
PoE working status
Delay start of power supply
PoE output priority
configuration
Scheduling of PoE operation and
time
Total power limit of PoE power
supply
PoE output power allocation,
off& af &at
|
|
|
Power Supply Pin
|
Default 1/2 (+), 3/6 (-)
|
|
|
Max Power
Per Port
|
30W; IEEE802.3af/at
|
|
|
Total PWR / Input Voltage
|
600W (AC100-240V)
|
|
|
Power Consumption
|
Standby<35W, Full Load<600W
|
|
|
Power Supply
|
Built-in power supply, AC 100~240V
50-60Hz 6.6A
|
|
|
Physical Parameter
|
|
|
Operation TEMP / Humidity
|
-20~+55°C, 5%~90% RH Non condensing
|
|
|
Storage TEMP / Humidity
|
-40~+75°C, 5%~95% RH Non condensing
|
|
|
Dimension (L*W*H)
|
440*290*44.5mm
|
|
|
Net /Gross Weight
|
<4.8kg / <5.5kg
|
|
|
Installation
|
Desktop, 19 inch 1U cabinet
|
|
|
Certification & Warranty
|
|
|
Lightning Protection / Protection Level
|
Lightning protection: 4KV
8/20us; Protection level: IP30
|
|
|
Certification
|
CCC;CE mark, commercial; CE/LVD
EN60950;FCC Part 15 Class B; RoHS
|
|
|
Warranty
|
3 years, lifelong maintenance.
|
|
|
Network Management Features
|
|
Interface
|
IEEE802.3X (Full-duplex)
Port temperature protection setting
Port green Ethernet
Energy-saving setting
Broadcast storm control based
on port speed
The speed limit of the message
flow in the access port.
The minimum particle size is
64Kbps.
|
|
Layer 3 Features
|
L2+ network management, IPV4 management
Static route, Default route @ 128
pcs, APR @ 1024 pcs
Communication between different
network segments and different VLANs
|
|
VLAN
|
VLAN based on MAC, QinQ
configuration
Port configuration of Access,
Trunk, Hybrid
4K VLAN based on port,
IEEE802.1q,VLAN based on the protocol
|
|
Port Aggregation
|
LACP, Static aggregation
Max 26 aggregation groups and 8
ports per group.
|
|
Spanning Tree
|
STP (IEEE802.1d), RSTP
(IEEE802.1w), MSTP (IEEE802.1s)
|
|
Multicast
|
MLD
Snooping v1/v2,Multicast VLAN
IGMP
Snooping v1/v2, Max 1024 multicast groups, Fast log out
|
|
Port Mirroring
|
Bidirectional data mirroring
based on port
|
|
QoS
|
Flow-based Rate Limiting
Flow-based Packet Filtering
8*Output queues of each port
802.1p/DSCP priority mapping
Diff-Serv QoS,Priority
Mark/Remark
Queue Scheduling Algorithm (SP,
WRR, SP+WRR)
|
|
ACL
|
Port-based Issuing ACL,ACL
based on port and VLAN
L2 to L4 packet filtering,
matching first 80 bytes message. Provide ACL based on MAC, Destination MAC
address, IP Source, Destination IP, IP Protocol Type, TCP/UDP Port, TCP/UDP
Port Range, and VLAN, etc.
|
|
Security
|
IP-MAC-VLAN-Port binding
ARP inspection,Anti-DoS attack
AAA & RADIUS,MAC learning
limit
Mac black holes,IP source
protection
IEEE802.1X & MAC address
authentication
Broadcast storm control,Backup
for host datum
SSH 2.0,SSL,Port isolation,ARP
message speed limit
User hierarchical management
and password protection
|
|
DHCP
|
DHCP Client,DHCP Snooping, DHCP Server,DHCP Relay
|
|
Management
|
One-key
recovery
Cable
Diagnose,LLDP
Web
Management (HTTPS)
NTP,System
work log,Ping Test
CPU
instant utilization status view
Console/AUX
Modem/Telnet/SSH2.0 CLI
Download
& Management on FTP, TFTP, Xmodem, SFTP,SNMP V1/V2C/V3
NMS
- smart network management system platform(LLDP+SNMP)
|
|
System
|
Category
5 Ethernet network cable
Web
browser: Mozilla Firefox 2.5 or higher, Google browser chrome V42 or higher, Microsoft
Internet Explorer10 or later;
TCP/IP,
network adapter, and network operating system (such as Microsoft Windows,
Linux, or Mac OS X) installed on each computer in a network
|
APPLICATION
PACKING LIST
Packing List
|
CONTENT
|
QTY
|
UNIT
|
52-port full gigabit managed PoE switch
|
1
|
SET
|
AC Power Cable
|
1
|
PC
|
RJ45-DB9 Line
|
1
|
PC
|
Mounting Kits(Hanging Ear)
|
1
|
SET
|
User Guide
|
1
|
PC
|
Warranty Card
|
1
|
PC
|
Ordering information
Related Products
