Site map    Tel:+86-21-37709251    Contact Us Chinese
8*E1+4*10/100/1000 Gigabit Ethernet PDH Fiber Multiplexer
The 8E1 fiber multiplexer realize 8E1 and 4*10/100/1000M Gigabit ethernet over fiber transmission.Large ethernet data capacity.

  Request price     Contact us

INFORMATION

OVERVIEW: 

BD-OP-8E1-4GE is the 8E1 point-to-point optical transport equipment that uses the FPGA chips and it is easy to upgrade. It is single board structure and the largest transmission capacity is 8E1 and 4*10/100*1000M Ethernet data.The outer design use the standard 19 inches rack, so the volume is small, weight is light and operation is convenient and credit.

Feature:

   ●   Provides 8 E1 transparent transmission ;

          ●   Provide 1~4 channel 10/100*1000M Ethernet ,4 Ethernet support VLAN isolation for option

          ●   The rate of optical port is 1.25G, transmission

          ●   E1 interface code is HDB3E1 vibration characteristic conforms to ITU-T G.703G.823 and G.742;

          ●   Ethernet port supports full/half duplex, 10M/100/1000M auto-ataptable;

          ●   Has complete alarm function for device status;

          ●   Supports E1 loop from remote so as to detect and manage device conveniently;

          ●   he combination AC220V and DC-48V for redundant for option

Specification:
1.25G Optical interface     
Optical wavelength: 850nm/1310nm for multi-mode optical interface,
                           1310nm/1550nm for single-mode optical interface 
Optical interface: SC/FC 
Receiving and dispatching module: >-6dBm 
Optical receiver receiving sensitivity: <-36dBm 
Dynamic range receiving: >-30dB 
Transmitting range: Multi-mode 2 Km, single-mode 40Km, single-mode 60 Km, single-mode 120Km 
Vibration characteristic: Satisfies G.742 and the G.823 standard

E1 interface    
Interface code: HDB3 code 
Line speed: 2.048Mbp/S ą50ppm 
Interface standard: ITU-T G 703 
Interface impedance: 75ohm/unbalanced or 120ohm/ balanced 

Gigabit Ethernet Interface:

Interface rate:10/100/1000Mbps

Port number:4 UTP

Interface characteristic: IEEE802.3, IEEE802.1Q
Connector: RJ45 

Mechanical Specifications

Rack Mounting

Standard 19-inch DIN rack  

Dimension

19inch 1 U: 433mm(L)*138mm(D)*44mm(H)

Management

SNMP central management via chassis for option, pls notisfy when order

Power Supply

Input AC/DC voltage

-48V DC ( nominal ) / AC also available

Range of input

-36V to -72V DC /90V~260VAC

Temperature

0  centi degree to 55 centi degree

Humidity

95% RH (non-condensing)

Cooling

Convection Cooling


Application:
8E1 Gigabit ethernet fiber multiplexer application



Ordering information


Related Products

8E1+4ethernet fiber multiplexer

8channel E1+4*10/100M ethernet over fiber multiplexer

8E1 to Ethernet Converter

ethernet over 8E1 converter,8channel E1,10/100M ethernet