The 2-WireSHDSL CPE that complies with PAM16 Line Code, G.991.2, and G.994.1 standards, and is equipped with an Ethernet switch with four 10/100BaseTX auto-sensing ports. The SHDSL Router modem provides basic Internet access via a 10/100Mbps Ethernet switch, and a SHDSL WAN port with routing function over SHDSL.
Features
1.High Speed Symmetrical Data Transmission on one Pairs of Twisted Copper
Wire ITU standard PAM16 Line Code, comply with G.991.2 and G.994.1 standards
Support Annex A and Annex B mode
operatio
2.Support
Wetting Current range from 0.3mA to
3mA
3.One
Switching hub with 4 * 10/100Mbps auto-sensing ports for PC
or LAN connection
4.Provide the broad range of Symmetrical Multi-rate Data Transmission from 144Kbps
up to 2.3 Mbps
5.Support PPPoE (RFC2516), PPP (RFC2364) and IP (RFC 2225/RFC1577) over ATM
over SHDSL
6.RFC2684 (RFC1483) Bridged/Routed
for both LLC/VC MUX Support IP unnumber
7.Support
VLAN
8.Support
Port-PVC function
9.DHCP
server supported for easy LAN IP address management
10.Allows
LAN users to access Internet through Network
Address Translation (NAT, IP sharing)
simultaneously Local
OAM&P through command line interface via RS-232
Craft port
11.Configuration and management by local Telnet, SNMP, and WEB Browser through the Ethernet interface and remotely
through SHDSL interface Firmware
upgradeable through TFTP
12.High
performance, simple operation and low power consumption
Application
Point to point application
Connection with DSLAM point to multi-point application
Management
The G.SHDSL router modem can be easily managed by WEB management and Console management. The user can configure and mornitor the device easily.
Navigation bar
