integrated EOC master with GE media converter
Site map    Tel:+86-21-37709251    Contact Us Chinese
integrate EOC master with GE media converter
BD-2EOC-2GE is the integrate EOC Master with two EOC master module and one Media Converter module. The EOC Master can provide high speed data service based on coaxial cable network. BD-2EOC-2GE built in a media convert, 10/100/1000Mbps media converter.

  Request price     Contact us

INFORMATION

Overview

BD-2EOC-2GE is the integrate EOC Master with two EOC master module and one Media Converter module.

The BD-2EOC-2GE EOC Master can provide high speed data service based on coaxial cable network. BD-2EOC-2GE built in a media convert, 10/100/1000Mbps media converter. The module supports IEEE 802.3, 802.3ab, 802.3u, 802.3z standards. It provide one SC/PC optical connector for 1000Base-Lx and four 10/100/1000M auto-negotiable Ethernet RJ45 interface. It can work with our MC head-end products and compliant with the third-party equipment.

The EOC Master Module is based the Qualcomm AR7410 chipset solutionwith high anti jamming capability OFDM technology. The 7.5-65MHz low frequency band is used for EOC signals. Built in high isolation filter as CATV RF and EOC signal mixer, the EOC signal and CATV signal in 87~862MHz can run on one cable without interference. The EOC Master can provide high speed data service. The PHY Layer speed is 600Mbps, the MAC Layer throughput is up to 320Mpbs.

The MC module connects with the EOC module, Ethernet data signals will be modulated into RF signals to transmit in the coaxial cable. BD-2EOC-2GE integrating EOC and MC can reduce the number of active node,  decreasing failure rate and saving a space. It is the best choice of LAN+EOC solution for the operator.

 

Function Features


n High integration with two EOC Master modules and one MC module

n Aluminum alloy die casting shaping, good heat dissipation

n Outdoor waterproof designed, 60V/220V power supply optional

n 7.5-65Mhz frequency for EOC signals., no influence on CATV Service

n Support broadcast storm limitation

n Support data packet statistics

n Support auto-update and auto-configuration

n Support On-line upgrading

n Support optical power measuring

n Flexible bandwidth allocation function

n Provide QOS for different service requirement

n Provide fault alarm function , easy for troubleshooting

n MC module is one standard media converter, provide different optical connector for different applicatio 

requirement

n Network management optional

n Compliant with the third-party equipment

n Support EMS based SNMP


Specification

Item

Parameters

Specification

Specification of EOC Module

Interface and LED Indicator

RF Port

1*EOC low-frequency signal output port, support F- Female or SMB connector

Ethernet Port

2*2 10/100/1000M auto-negotiation, RJ45

LED Indicator

2*1 for Power Supply Status

2*1 CABLE Link Status indicator

2*2 for Ethernet Ports Status

Performance Parameters

RF Parameters

Frequency Band :7.5-65MHz

RF Output Level:110【5dBuv@ output of module

Receive sensitivity: 45dBuv

Return Loss:>16dB

Output Resistance:75

Transmission

PHY Layer:600Mbps

Throughput on MAC Layer:320Mbps

Modulation Mode

OFDM~ 2690~carriers  4096,1024,256,64,16,8~QAM, QPSK, BPSK, ROBO

Working Mode

TDMA/CSMA

Encryption Mode

AES-128

Standard

EOC Standard

IEEE P1901(Draft)

HomePlug AV

Ethernet Standard

IEEE 802.3, IEEE 802.3x, IEEE 802.3u

IEEE802.1P, IEEE802.1Q

Software

Network Management

WEB, CLI, SNMP

Software Features

VLAN, QOS, Bandwidth Control, Broadcast storm limitation

Specification of MC Module

Interface

Copper Port

One 10/100/1000Mauto-negotiation , RJ45;

Compliant with IEEE802.3, IEEE802.3u,IEEE802.3z

Auto MDI/MDI-X

Full/Half-Duplex

Up to 100m distance

Fiber Port

Connector Type: One SC/PC

1000Base-SX1000Base-Lx

1.25Gbps

Wavelength 850nm/1310nm/1550nm optional

Transmission distance 2100KM

Power Supply

2PIN socket, 12V DC  

Indicator Description

PWR

On:  Power is coming up

Off:  no power supply

Fiber

On:  Optical Linked

BlinkIn transmitting or receiving

Off:  Not connected or link trouble

1000M

On:  Linked on 1000Mbps

Blink:  optic port connected well

OffNot connected or link trouble

Act

On:  Physical link is OK

Blink:  In transmitting or receiving

Off:  Not connected or link trouble

Performance Parameters

Working Mode

Store-and-forward

Max Packet Length

9K bytes

Packet Forwarding

1488000pps (64bytes/Frame)

latency

< 5us @64bytes, 28us@1518bytes

Packet Loss

operating temperature rangePacket Loss in 72 hours0%

Long-term Packet Loss<10-7 (64 ~9728 bytes @ 100% throughput)

Physical Features

Physical Features

Power supply & Consumption

Power Supply220V/60V optional

Consumption<16.5W

Size & Net weight

Dimension290】220】120mm

Weight3.7kg

Environment Attribute

Working Temperature:-1065

Storage Temperature-4085

Working humidity10%90%non-condensing

Storage humidity10%90% non-condensing

 

Typical Application

 CATV

 Internet Access

 VOD

 IPTV

 Camera monitor system


Application Illustration


      Figure 1 BD-2EOC-2GE Application Illustration



Ordering information


Related Products