USB to RS485/422 Interface Converter
Site map    Tel:+86-21-37709251    Contact Us Chinese
USB to RS485/422 Interface Converter
Can be applied to POS, access control, automatic teller machines, embedded industrial automation systems, financial payment ATM systems, transportation systems, factory automation and process control, medical systems, remote access servers, and so on.

  Request price     Contact us

INFORMATION

Overview:

BD-USB-485/422 interface converter with magnetic FTDI chip 1.8MPerformance Parameters

1. Meet USB1.0,1.1,2.0 standards;

2. comply with EIA RS422, EIA RS485 standard

3.USB signal: VCC, DATA-, DATA +, GND.FG

4.RS-422 signal: T / R +, T / R-, RXT +, RXD-, GND; RS-485 signal: T / R +, T / R-.GND

5.RS-422 Work: Full-duplex bi-directional point-to-many communication

6.RS-485 Work: point half-duplex two-way communication for many

7. Maximum transmission distance: USB port does not more than five meters, RS-422/485 terminal 1200 m (9600bps time)

8. Transmission media: twisted pair or shielded cable

9. Load capacity: RS-422, up to 10, including the main equipment; RS-485, up to 32

10. Baud rate: 300 baud to 921600baud automatically detect the serial transfusion rate;

11. Flow control: none, hardware and xon / xoff

12. Interface protection: Surge protection, ± 15KV electrostatic protection

13. The signal indicator: Send (TXD), receive (RXD), power (POWER)

14.USB cable with magnetic shielding, can be anti-interference;

15. Working environment: -40 to 85⁰C

Connector and Signal

DB9 male, RS-422 / RS485 output signals and terminals pin definitions


The main means of communication

1. The four-wire full-duplex point to point

2. multipoint four-wire full-duplex

3. The two-point half-duplex

4. Double-multipoint half-duplex

Converter as full or half duplex connection, in order to prevent reflections and interference signals, you need to pick a matching line of terminal resistor (parameters: 120 ohm 1 / 4W)

Installation and Applications

Before installing this product, please read the product instructions carefully priority.

1. Insert the USB connector end of the product's access to the computer's USB port side;

2. Connect the device to DB9M end product.

The product uses a USB / DB9M, universal connector for input or output interface, without the jumper settings automatically RS-422, RS485 communication. T / R +, T / R- representative emission, RX +, RX- representatives receive, GND on behalf of common ground.

Can be applied to POS, access control, automatic teller machines, embedded industrial automation systems, financial payment ATM systems, transportation systems, factory automation and process control, medical systems, remote access servers, and so on.




Ordering information


Related Products

E1 G.703 to RS485 converter

BD-E1-RS485/AC E1 G.703 to RS485 converter,AC220V BD-E1-RS485/DC E1 G.703 to RS485 converter,DC48V

Serial to Ethernet Converter | Console server

Baudcom serial to ethernet converter is serial(RS232,RS485 or RS422) to Ethernet connectivity applications.