Site map    Tel:+86-21-37709251    Contact Us Chinese
4Channel RS232/485/422 Serial to Ethernet converter
The 4channel RS232/RS485/RS422 serial to ethernet converter can provide 4port RS485 or RS422 or RS232 to ethernet.Strong surge protection and ESD protection,cost effective solution.

  Request price     Contact us


The Baudcom RS232/RS485/RS422 to ethernet converter   is the best choice for simple serial to Ethernet connectivity applications. Delivering a cost effective solution in a compact size, the serial server offers flexibility making it ideal for applications that require an authentic serial connection across an Ethernet network.
The  4 channel serial to ethernet /IP servers can connect 4 port serial devices to an Ethernet network, It support RS232/RS422/RS485 Serial Standards, It can be widely applied in different fields for such as PLCs, sensors, meters, motors, drives, barcode readers, and operator displays. The 8channel serial to ethernet servers are ultra-lean, ruggedized, and user friendly, making simple and reliable serial to Ethernet solutions possible.

1.     4KV/2KA enhanced surge protection for serial ports
2.     Built-in 15 KV ESD protection for all serial signals
3.     Web-based configuration
4.     Support TCP server/ TCP client/UDP/Virtual COM Socket modes
5.     It has a compact structure, adopting high-performance processor and high-capacity memory;
6.     Device Manager software for centralized management and control;
7.     WEB browser for remote setup of the equipment;
8.     It can support 8channel RS232 or RS485 or RS422
9.      Ethernet supports 10M/100M, full-duplex / half-duplex and adaptive modes;
      Connect serial devices to server based applications over an IP network
      Manage remote serial console ports over an IP network
      Virtual modem capability for modem-based applications

Ethernet Interface
10/100Mbps rate
full/duplex auto-negotiation
Protocol: Support IEEE 802.3
RJ45 connector
Magnetic Isolation Protection: 1.5 KV built-in
Serial interface
Software and hardware flow control
Terminal Block (3 pins per port)
TX and RX activity indicators
 Serial Line Protection:

  15 KV ESD protection for all signals(Pending)
  Pull High/Low Resistor for RS-485: 10 K Ω,Serial Communication Parameters
  Data Bits:  5, 6, 7, 8
  Stop Bits:  1, 2
  Parity:  None, Even, Odd, Space, Mark
  Baudrate:  300 bps to 115.2 Kbps
Serial Signals
RS-232: TxD, RxD,GND
RS-422: Tx+, Tx-, Rx+, Rx-, GND
RS-485-2w: Data+, Data-, GND
   Network Protocols: ICMP, IP, TCP, UDP, HTTP, ARP,
   Configuration Options: Built-in WEB server,
   Windows Virtual COM Drivers: Windows 2000/XP/2003/Vista/2008/7
183 x 88 x 30mm
Environmental Limits
  Operating Temperature:  0 to 50 degree 
  Storage Temperature:  -40 to 85 degree
  Ambient Relative Humidity: 5 to 95% (non-condensing)
Power Requirements
  Input Voltage: 
5 VDC, 24VDC, -48VDC, 110VAC and 220VAC
 Power Consumption: <5 watts

Ordering information

Related Products

one channel RS485/RS422/RS232 to Ethernet converter

E1 to ethernet converter

E1/4E1/8E1/16E1 to ethernet converter